MIB

This document updates RFC 6353 ("Transport Layer Security (TLS) Transport Model for the Simple Network Management Protocol (SNMP)") to reflect changes necessary to support Transport Layer Security version 1.3 (TLS 1.3) and Datagram Transport Layer Security version 1.3 (DTLS 1.3), which are jointly known as "(D)TLS 1.3". This document is compatible with (D)TLS 1.2 and is intended to be compatible with future versions of SNMP and (D)TLS.

This document updates the SNMP-TLS-TM-MIB as defined in RFC 6353.

This document describes managed objects for the management of IP Traffic Flow Security additions to Internet Key Exchange Protocol Version 2 (IKEv2) and IPsec. This document provides a read-only version of the objects defined in the YANG module for the same purpose, which is in "A YANG Data Model for IP Traffic Flow Security" (RFC 9348).

RFC 5309 defines the Point-to-Point (P2P) circuit type, one of the two circuit types used in the link-state routing protocols, and highlights that it is important to identify the correct circuit type when forming adjacencies, flooding link-state database packets, and monitoring the link state.

This document provides advice about the ifStack for the P2P interface over a LAN Type to facilitate operational control, maintenance, and statistics.

This memo defines a portion of the Management Information Base (MIB) for use with network management protocols in the Internet community. In particular, it describes two MIB modules that will be used by other MIB modules for monitoring and/or configuring Layer 2 and Layer 3 Virtual Private Networks that support multicast.

This memo defines a portion of the Management Information Base (MIB) for use with network management protocols in the Internet community. In particular, it describes managed objects to configure and/or monitor Multicast communication over IP Virtual Private Networks (VPNs) supported by the Multiprotocol Label Switching/Border Gateway Protocol (MPLS/BGP) on a Provider Edge (PE) router.

This memo defines a portion of the Management Information Base (MIB) for Mapping of Address and Port with Encapsulation (MAP-E) for use with network management protocols.

This document defines a YANG data model for the management of hardware on a single server.

This memo defines a portion of the Management Information Base (MIB) for use with network management protocols in internets based on TCP or IP. In particular, it defines objects for managing networks using the Precision Time Protocol (PTP), specified in IEEE Std. 1588-2008.

This memo specifies a MIB module in a manner that is both compliant to the Structure of Management Information version 2 (SMIv2) and semantically identical to the peer SMIv1 definitions.

This document specifies a way to complement IP Flow Information Export (IPFIX) Data Records with Management Information Base (MIB) objects, avoiding the need to define new IPFIX Information Elements for existing MIB objects that are already fully specified.

Two IPFIX Options Templates, as well as a method for creating IPFIX Options Templates that are used to export the extra data required to fully describe Simple Network Management Protocol (SNMP) MIB objects in IPFIX, are specified herein.

This memo defines a portion of the Management Information Base (MIB) for use with network management protocols. In particular, it defines objects for managing Multiprotocol Label Switching - Transport Profile (MPLS-TP) linear protection.

In 2005-2006, the IPv6 MIB update group published updated versions of the IP-MIB, UDP-MIB, TCP-MIB, and IP-FORWARD-MIB modules, which use the InetAddressType/InetAddress construct to handle IPv4 and IPv6 in the same table. This document contains versions of the obsoleted IPV6-MIB, IPV6-TC, IPV6-ICMP-MIB, IPV6-TCP-MIB, and IPV6-UDP-MIB modules for the purpose of updating MIB module repositories. This document obsoletes RFCs 2452, 2454, 2465, and 2466 (i.e., the RFCs containing these MIBs) and reclassifies them as Historic.

This document replaces RFC 6779; it contains revisions and extensions to the original document. It defines a portion of the Management Information Base (MIB) for use with network management protocols in the Internet community. In particular, it describes objects for configuring parameters of the Neighborhood Discovery Protocol (NHDP) process on a router. The extensions described in this document add objects and values to support the NHDP optimization specified in RFC 7466. The MIB module defined in this document, denoted NHDP-MIB, also reports state, performance information, and notifications about NHDP. This additional state and performance information is useful to troubleshoot problems and performance issues during neighbor discovery.

This memo defines a portion of the Management Information Base (MIB) for use with network management protocols in the Internet community. In particular, it defines managed objects for Address Family Transition Routers (AFTRs) of Dual-Stack Lite (DS-Lite).

This memo defines a portion of the Management Information Base (MIB) for use with network management protocols in the Internet community. In particular, it defines objects for managing a softwire mesh.

This document specifies the MIB for the OAM (Operations, Administration, and Maintenance) objects for IETF TRILL (Transparent Interconnection of Lots of Links).

This memo defines a portion of the Management Information Base (MIB) for use with network management protocols in the Internet community. In particular, it describes managed objects to configure the Operations, Administration, and Maintenance (OAM) identifiers for Multiprotocol Label Switching (MPLS) and the MPLS-based Transport Profile (TP).

This memo deprecates MIB module NAT-MIB, a portion of the Management Information Base (MIB) previously defined in RFC 4008 for devices implementing Network Address Translator (NAT) function. A companion document defines a new version, NATV2-MIB, which responds to deficiencies found in module NAT-MIB and adds new capabilities.

This document obsoletes RFC 4008. All MIB objects specified in RFC 4008 are included in this version unchanged with only the STATUS changed to deprecated.

This memo defines a portion of the Management Information Base (MIB) for devices implementing the Network Address Translator (NAT) function. The new MIB module defined in this document, NATV2-MIB, is intended to replace module NAT-MIB (RFC 4008). NATV2-MIB is not backwards compatible with NAT-MIB, for reasons given in the text of this document. A companion document deprecates all objects in NAT-MIB. NATV2-MIB can be used for the monitoring of NAT instances on a device capable of NAT function. Compliance levels are defined for three application scenarios: basic NAT, pooled NAT, and carrier-grade NAT (CGN).

This document defines a portion of the Management Information Base (MIB) for use with network management protocols in the Internet community. In particular, this specifies objects for managing virtual machines controlled by a hypervisor (a.k.a. virtual machine monitor).

This memo defines a portion of the Management Information Base (MIB) for use with network management protocols in the Internet community. In particular, it defines managed objects that provide information on the status of batteries in managed devices.

This document defines a subset of the Management Information Base (MIB) for power and energy monitoring of devices.

This document defines a subset of a Management Information Base (MIB) for energy management of devices. The module addresses device identification, context information, and the energy relationships between devices.

This memo defines a portion of the Management Information Base (MIB) for use with network management protocols in the Internet community. In particular, it describes additional managed objects and textual conventions for tunnels, identifiers, and Label Switching Routers to support Multiprotocol Label Switching (MPLS) MIB modules for transport networks.

This document records the transfer of responsibility for the Ethernet-related MIB modules DOT3-OAM-MIB, SNMP-REPEATER-MIB, POWER-ETHERNET-MIB, DOT3-EPON-MIB, EtherLike-MIB, EFM-CU-MIB, ETHER-WIS, and MAU-MIB from the IETF to the IEEE 802.3 Working Group (WG). This document also describes the procedures associated with the transfer in a similar way to how RFC 4663 records the transfer of the IETF Bridge MIB work to the IEEE 802.1 WG.

This memo defines a portion of the Management Information Base (MIB) for use with network management protocols in the Internet community. In particular, it describes managed objects for modeling of the Path Computation Element Communication Protocol (PCEP) for communications between a Path Computation Client (PCC) and a Path Computation Element (PCE), or between two PCEs.

This document defines a portion of the Management Information Base (MIB) for use with network management protocols in the Internet community. In particular, it defines objects for managing IPv6 over Low-Power Wireless Personal Area Networks (6LoWPANs).

This memo defines a portion of the Management Information Base (MIB) for use with network management protocols in the Internet community. In particular, it describes objects for configuring aspects of the Simplified Multicast Forwarding (SMF) process for Mobile Ad Hoc Networks (MANETs). The SMF-MIB module also reports state information, performance information, and notifications. In addition to configuration, the additional state and performance information is useful to operators troubleshooting multicast forwarding problems.

This document defines a portion of the Management Information Base (MIB) for use with network management protocols in the Internet community. In particular, it describes managed objects for modeling the Bidirectional Forwarding Detection (BFD) protocol.

This document defines two Management Information Base (MIB) modules that contain Textual Conventions to represent commonly used Bidirectional Forwarding Detection (BFD) management information. The intent is that these TEXTUAL CONVENTIONS (TCs) will be imported and used in BFD-related MIB modules that would otherwise define their own representations.

This memo defines a portion of the Management Information Base (MIB) for use with network management protocols in the Internet community. In particular, it describes managed objects to configure and/or monitor Virtual Private LAN services. It needs to be used in conjunction with the Pseudowire (PW) Management Information Base (PW-STD-MIB from RFC 5601).

This document defines the Management Information Base (MIB) module for configuring and managing the Optimized Link State Routing Protocol version 2 (OLSRv2). The OLSRv2-MIB module is structured into configuration information, state information, performance information, and notifications. This additional state and performance information is useful for troubleshooting problems and performance issues of the routing protocol. Two levels of compliance allow this MIB module to be deployed on constrained routers.

This document defines a portion of the Management Information Base (MIB) for use with network management protocols. In particular, it defines objects for managing a client using the Internet Small Computer System Interface (iSCSI) protocol (SCSI over TCP).

This document obsoletes RFC 4544.

This document updates RFC 5066. It amends that specification by informing the Internet community about the transition of the EFM-CU-MIB module from the concluded IETF Ethernet Interfaces and Hub MIB Working Group to the Institute of Electrical and Electronics Engineers (IEEE) 802.3 working group.

This document defines the MIB module that contains managed objects to support the monitoring devices of the Locator/ID Separation Protocol (LISP). These objects provide information useful for monitoring LISP devices, including determining basic LISP configuration information, LISP functional status, and operational counters and other statistics.

This memo defines a portion of the Management Information Base (MIB) for use with network management protocols in the Internet community. In particular, it describes managed objects used for managing multiple logical and physical entities managed by a single Simple Network Management Protocol (SNMP) agent. This document specifies version 4 of the Entity MIB. This memo obsoletes version 3 of the Entity MIB module published as RFC 4133.

This document defines a portion of the Management Information Base (MIB) for use with network management protocols in the Internet community. In particular, it describes objects used for monitoring the Resource Public Key Infrastructure (RPKI) to Router Protocol.

This document defines a Management Information Base (MIB) module for use with network management protocols in TCP/IP-based internets. This document defines an extension to the Interfaces Group MIB with a set of common objects for managing multi-pair bonded Digital Subscriber Line (xDSL) interfaces, as defined in ITU-T Recommendations G.998.1, G.998.2, and G.998.3. The textual conventions defining the bonding schemes are contained in a separate MIB module maintained by Internet Assigned Numbers Authority (IANA). The MIB modules specific to each bonding technology are defined in G9981-MIB, G9982-MIB, and G9983-MIB, respectively.

This document defines a Management Information Base (MIB) module for use with network management protocols in TCP/IP-based internets. This document proposes an extension to the GBOND-MIB module with a set of objects for managing multi-pair bonded xDSL interfaces using Time-Division Inverse Multiplexing (TDIM), as defined in ITU-T Recommendation G.998.3.

This document defines a Management Information Base (MIB) module for use with network management protocols in TCP/IP-based internets. This document defines an extension to the GBOND-MIB module with a set of objects for managing Ethernet-based multi-pair bonded Digital Subscriber Line (xDSL) interfaces, as defined in ITU-T Recommendation G.998.2.

This document defines a Management Information Base (MIB) module for use with network management protocols in TCP/IP-based internets. This document proposes an extension to the GBOND-MIB module with a set of objects for managing ATM-based multi-pair bonded xDSL interfaces, as defined in ITU-T Recommendation G.998.1.

This memo defines a portion of the Management Information Base (MIB) for use with network management protocols. In particular, it defines objects for managing a Routing Bridge (RBridge), also known as a TRILL Switch, based on the IETF TRILL (Transparent Interconnection of Lots of Links) protocol. [STANDARDS-TRACK]

This memo defines the Management Information Base (MIB) objects for managing the Traffic Engineering Database (TED) information with extensions in support of the Multiprotocol Label Switching (MPLS) with Traffic Engineering (TE) as well as Generalized MPLS (GMPLS) for use with network management protocols. [STANDARDS-TRACK]

This memo defines a portion of the Management Information Base (MIB) for use with network management protocols in the Internet community. In particular, it describes extensions to the IPFIX-SELECTOR-MIB module. For IP Flow Information eXport (IPFIX) implementations that use Packet Sampling (PSAMP) techniques, this memo defines the PSAMP- MIB module containing managed objects for providing information on applied packet selection functions and their parameters. [STANDARDS-TRACK]

YANG is a data modeling language used to model configuration and state data manipulated by the Network Configuration Protocol (NETCONF), NETCONF remote procedure calls, and NETCONF notifications. The Structure of Management Information (SMIv2) defines fundamental data types, an object model, and the rules for writing and revising MIB modules for use with the Simple Network Management Protocol (SNMP). This document defines a translation of SMIv2 MIB modules into YANG modules, enabling read-only (config false) access to data objects defined in SMIv2 MIB modules via NETCONF. [STANDARDS-TRACK]

A range of Management Information Base (MIB) modules has been developed to help model and manage the various aspects of Multiprotocol Label Switching (MPLS) networks. These MIB modules are defined in separate documents that focus on the specific areas of responsibility of the modules that they describe.

The MPLS Transport Profile (MPLS-TP) is a profile of MPLS functionality specific to the construction of packet-switched transport networks.

This document describes the MIB-based architecture for MPLS-TP, indicates the interrelationships between different existing MIB modules that can be leveraged for MPLS-TP network management, and identifies areas where additional MIB modules are required. This document is not an Internet Standards Track specification; it is published for informational purposes.

This document defines managed objects for IP Flow Information eXport (IPFIX). These objects provide information for monitoring IPFIX Exporters and IPFIX Collectors, including basic configuration information. [STANDARDS-TRACK]

This memo defines a portion of the Proxy Mobile IPv6 Management Information Base (MIB) for use with network management protocols in the Internet community. In particular, the Proxy Mobile IPv6 MIB can be used to monitor and control the mobile access gateway (MAG) and the local mobility anchor (LMA) functions of a Proxy Mobile IPv6 (PMIPv6) entity. [STANDARDS-TRACK]

This specification defines a portion of the Management Information Base (MIB) for use with network management based on the Simple Network Management Protocol (SNMP). In particular, it defines objects for configuring, monitoring, and controlling routers that employ the Virtual Router Redundancy Protocol Version 3 (VRRPv3) for both IPv4 and IPv6 as defined in RFC 5798. This memo obsoletes RFC 2787. [STANDARDS-TRACK]

This memo defines a portion of the Management Information Base for use with network management protocols in the Internet community. In particular, it describes managed objects used to support two fast reroute (FRR) methods for Multiprotocol Label Switching (MPLS)-based traffic engineering (TE). The two methods are the one-to-one backup method and the facility backup method. [STANDARDS-TRACK]

This memo defines a Management Information Base (MIB) module containing textual conventions (TCs) to represent floating-point numbers. [STANDARDS-TRACK]

This document describes a Transport Model for the Simple Network Management Protocol (SNMP), that uses either the Transport Layer Security protocol or the Datagram Transport Layer Security (DTLS) protocol. The TLS and DTLS protocols provide authentication and privacy services for SNMP applications. This document describes how the TLS Transport Model (TLSTM) implements the needed features of an SNMP Transport Subsystem to make this protection possible in an interoperable way.

This Transport Model is designed to meet the security and operational needs of network administrators. It supports the sending of SNMP messages over TLS/TCP and DTLS/UDP. The TLS mode can make use of TCP's improved support for larger packet sizes and the DTLS mode provides potentially superior operation in environments where a connectionless (e.g., UDP) transport is preferred. Both TLS and DTLS integrate well into existing public keying infrastructures.

This document also defines a portion of the Management Information Base (MIB) for use with network management protocols. In particular, it defines objects for managing the TLS Transport Model for SNMP. [STANDARDS-TRACK]

This memo defines a portion of the Management Information Base (MIB) for use with network management protocols in the Internet community. In particular, it describes managed objects for modeling Synchronous Optical Network/Synchronous Digital Hierarchy (SONET/SDH) circuits over a Packet Switch Network (PSN). [STANDARDS-TRACK]

This document defines Management Information Base (MIB) objects to monitor and control the Internet Fibre Channel Protocol (iFCP) gateway instances and their associated sessions, for use with network management protocols.

This document obsoletes RFC 4369. [STANDARDS-TRACK]

This memo defines a portion of the Management Information Base (MIB) for use with network management protocols. It describes the use of information provided by Authentication, Authorization, and Accounting (AAA) services, such as the Remote Authentication Dial-In User Service (RADIUS), to dynamically update user-to-group mappings in the View-based Access Control Model (VACM). [STANDARDS-TRACK]

This memo defines the IETF standard expression of Structure of Management Information (SMI) base datatypes in XML Schema Definition (XSD) language. The primary objective of this memo is to enable the production of XML documents that are as faithful to the SMI as possible, using XSD as the validation mechanism. [STANDARDS-TRACK]

The Network Time Protocol (NTP) is used in networks of all types and sizes for time synchronization of servers, workstations, and other networked equipment. As time synchronization is more and more a mission-critical service, standardized means for monitoring and management of this subsystem of a networked host are required to allow operators of such a service to set up a monitoring system that is platform- and vendor-independent. This document provides a standardized collection of data objects for monitoring the NTP entity of such a network participant and it is part of the NTP version 4 standardization effort. [STANDARDS-TRACK]

This memo defines a portion of the Management Information Base (MIB) for use with network management protocols. In particular, it describes the managed objects for modeling the Control And Provisioning of Wireless Access Points (CAPWAP) Protocol. This MIB module is presented as a basis for future work on the SNMP management of the CAPWAP protocol. This document is not an Internet Standards Track specification; it is published for informational purposes.

This memo defines a portion of the Management Information Base (MIB) for use with network management protocols. In particular, it describes managed objects for modeling the Control And Provisioning of Wireless Access Points (CAPWAP) protocol for IEEE 802.11 wireless binding. This MIB module is presented as a basis for future work on the management of the CAPWAP protocol using the Simple Network Management Protocol (SNMP). This document is not an Internet Standards Track specification; it is published for informational purposes.

This document describes the MIB module for the Digital Video Broadcasting Return Channel via Satellite system (DVB-RCS), as defined by the SatLabs Group. It defines a set of MIB objects to characterize the behavior and performance of network-layer entities deploying DVB-RCS. This document is not an Internet Standards Track specification; it is published for informational purposes.

This memo defines a Management Information Base (MIB) module for use with network management protocols in the Internet community. In particular, it defines managed objects for the Forwarding and Control Element Separation (ForCES) Network Element (NE). [STANDARDS-TRACK]

This memo defines a portion of the Management Information Base (MIB) for use with network management protocols in the Internet community. In particular, it defines a mapping of SYSLOG messages to Simple Network Management Protocol (SNMP) notifications. [STANDARDS-TRACK]

This document defines a Management Information Base (MIB) module for use with network management protocols in the Internet community. In particular, it describes objects used for managing parameters of the "Very High Speed Digital Subscriber Line 2 (VDSL2)" interface type, which are also applicable for managing Asymmetric Digital Subscriber Line (ADSL), ADSL2, and ADSL2+ interfaces. [STANDARDS-TRACK]

This memo defines a portion of the Management Information Base (MIB) for use with network management protocols in IPv6-based internets. In particular, it defines objects for managing the Open Shortest Path First (OSPF) Routing Protocol for IPv6, otherwise known as OSPF version 3 (OSPFv3). [STANDARDS-TRACK]

This document describes an Enterprise Number (also known as SMI Network Management Private Enterprise Code) for use in documentation. This memo provides information for the Internet community.

This memo defines a Standards Track portion of the Management Information Base for use with network management protocols in the Internet community. In particular, it describes managed objects for modeling of Pseudowire Edge-to-Edge services carried over a general Packet Switched Network. [STANDARDS-TRACK]

This memo defines a portion of the Management Information Base (MIB) for use with network management protocols in the Internet community. In particular, it describes a MIB module for PW operation over Multiprotocol Label Switching (MPLS) Label Switching Routers (LSRs). [STANDARDS-TRACK]

This memo defines a portion of the Management Information Base (MIB) for use with network management protocols in the Internet community. In particular, it describes managed objects for modeling of Ethernet pseudowire (PW) services. [STANDARDS-TRACK]

This memo defines a portion of the Management Information Base (MIB) for use with network management protocols in the Internet community. In particular, it describes managed objects for pseudowire encapsulation for structured or unstructured Time-Division Multiplexing (TDM) (T1, E1, T3, E3) circuits over a Packet Switched Network (PSN). [STANDARDS-TRACK]

This memo defines a portion of the Management Information Base (MIB) for use with network management protocols in the Internet community. In particular, it describes managed objects for modeling ATM Pseudowire (PW) carrying ATM cells over Packet Switched Networks (PSNs). [STANDARDS-TRACK]

This document defines a Transport Subsystem, extending the Simple Network Management Protocol (SNMP) architecture defined in RFC 3411. This document defines a subsystem to contain Transport Models that is comparable to other subsystems in the RFC 3411 architecture. As work is being done to expand the transports to include secure transports, such as the Secure Shell (SSH) Protocol and Transport Layer Security (TLS), using a subsystem will enable consistent design and modularity of such Transport Models. This document identifies and describes some key aspects that need to be considered for any Transport Model for SNMP. [STANDARDS-TRACK]

This memo defines a Management Information Base (MIB) module that contains textual conventions (TCs) to represent commonly used pseudowire (PW) management information. The intent is that these TCs will be imported and used in PW-related MIB modules that would otherwise define their own representations. [STANDARDS-TRACK]

Reliable Server Pooling (RSerPool) is a framework to provide reliable server pooling. The RSerPool framework consists of two protocols: ASAP (Aggregate Server Access Protocol) and ENRP (Endpoint Handlespace Redundancy Protocol). This document defines an \%SMIv2- compliant (Structure of Management Information Version 2) Management Information Base (MIB) module providing access to managed objects in an RSerPool implementation. This memo defines an Experimental Protocol for the Internet community.

This memo defines a portion of the Management Information Base (MIB), the Network Mobility (NEMO) support MIB, for use with network management protocols in the Internet community. In particular, the NEMO MIB will be used to monitor and control a Mobile IPv6 node with NEMO functionality. [STANDARDS-TRACK]

This memo defines a portion of the Management Information Base (MIB) for use with network management protocols in the Internet community. In particular, it describes objects used for managing the Internet Group Management Protocol (IGMP) and the Multicast Listener Discovery (MLD) protocol. [STANDARDS-TRACK]

This memo defines a portion of the Management Information Base (MIB) for use with network management protocols in the Internet community. In particular, it defines a basic set of managed objects for Simple Network Management Protocol (SNMP)-based management of events that can be generated by PacketCable- and IPCablecom-compliant Multimedia Terminal Adapter devices. [STANDARDS-TRACK]

This MIB module defines textual conventions to represent Facility and Severity information commonly used in syslog messages. The intent is that these textual conventions will be imported and used in MIB modules that would otherwise define their own representations. [STANDARDS-TRACK]

This document describes a standard way to store the configuration and the results of traceroute measurements. This document first describes the terminology used in this document and the traceroute tool itself; afterwards, the common information model is defined, dividing the information elements into two semantically separated groups (configuration elements and results elements). Moreover, an additional element is defined to relate configuration elements and results elements by means of a common unique identifier. On the basis of the information model, a data model based on XML is defined to store the results of traceroute measurements. [STANDARDS-TRACK]

This memo defines a portion of the Management Information Base (MIB) for use with network management protocols in the Internet community. In particular, it describes managed objects for information related to FC-SP, the Security Protocols defined for Fibre Channel. [STANDARDS-TRACK]

This memo references three annotated templates for IETF documents that contain the definition of MIB modules. It is intended to reduce the work of the editors of such documents, making these documents more uniform and easier to read and review, thus furthering the quality of such documents and expediting their publication. This document specifies an Internet Best Current Practices for the Internet Community, and requests discussion and suggestions for improvements.

This document defines a portion of the Management Information Base (MIB) for use with network management protocols in the Internet community. In particular, it describes managed objects used for managing the Bootstrap Router (BSR) mechanism for PIM (Protocol Independent Multicast). [STANDARDS-TRACK]

This memo defines a portion of the Management Information Base (MIB) for use with network management protocols in the Internet community. In particular, it describes a set of managed objects that allow configuring middleboxes, such as firewalls and network address translators, in order to enable communication across these devices. The definitions of managed objects in this documents follow closely the MIDCOM semantics defined in RFC 5189. [STANDARDS-TRACK]

This memo defines a portion of the Management Information Base (MIB) for use with network management protocols in the Internet community. In particular, it defines a basic set of managed objects for Simple Network Management Protocol (SNMP)-based management of PacketCable- and IPCablecom-compliant Multimedia Terminal Adapter devices. [STANDARDS-TRACK]

This memo defines a portion of the Management Information Base (MIB) for use with network management protocols in the Internet community. In particular, it describes managed objects used for managing the Protocol Independent Multicast (PIM) protocols: PIM-SM (Sparse Mode), BIDIR-PIM (Bidirectional), and PIM-DM (Dense Mode). This document is part of work in progress to obsolete RFC 2934, and is to be preferred where the two documents overlap. This document does not obsolete RFC 2934. [STANDARDS-TRACK]

This document specifies a Management Information Base (MIB) module for the Lightweight User Datagram Protocol (UDP-Lite). It defines a set of new MIB objects to characterise the behaviour and performance of transport layer endpoints deploying UDP-Lite. UDP-Lite resembles UDP, but differs from the semantics of UDP by the addition of a single option. This adds the capability for variable-length data checksum coverage, which can benefit a class of applications that prefer delivery of (partially) corrupted datagram payload data in preference to discarding the datagram. [STANDARDS-TRACK]

This MIB module defines a textual convention to represent BCP 47 language tags. The intent is that this textual convention will be imported and used in MIB modules that would otherwise define their own representation. [STANDARDS-TRACK]

This memo defines a portion of the Management Information Base (MIB) for use with network management protocols in the Internet community. In particular, it describes objects used for managing multicast function, independent of the specific multicast protocol(s) in use. This document obsoletes RFC 2932. [STANDARDS-TRACK]

This document defines Management Information Base (MIB) modules for use with network management protocols in TCP/IP-based internets. This document describes extensions to the Ethernet-like Interfaces MIB and Medium Attachment Unit (MAU) MIB modules with a set of objects for managing Ethernet in the First Mile Copper (EFMCu) interfaces 10PASS-TS and 2BASE-TL, defined in IEEE Std 802.3ah-2004 (note: IEEE Std 802.3ah-2004 has been integrated into IEEE Std 802.3- 2005). In addition, a set of objects is defined, describing cross- connect capability of a managed device with multi-layer (stacked) interfaces, extending the stack management objects in the Interfaces Group MIB and the Inverted Stack Table MIB modules. [STANDARDS-TRACK]

This MIB module defines textual conventions to represent STD 66 Uniform Resource Identifiers (URIs). The intent is that these textual conventions will be imported and used in MIB modules that would otherwise define their own representation(s). [STANDARDS-TRACK]

This memo defines a portion of the Management Information Base (MIB) for use with network management protocols in the Internet community. In particular, it describes managed objects for information related to the management of Fibre Channel's Registered State Change Notifications (RSCNs). [STANDARDS-TRACK]

This memo defines a portion of the Management Information Base (MIB) for use with network management protocols in the Internet community. In particular, it describes managed objects for information related to the Fabric Configuration Server function of a Fibre Channel network. [STANDARDS-TRACK]

This memo defines a portion of the Management Information Base (MIB) for use with network management protocols in the Internet community. In particular, it describes managed objects for information related to a Fibre Channel Zone Server. [STANDARDS-TRACK]

The iSNS (Internet Storage Name Service) protocol provides storage name service functionality on an IP network that is being used for iSCSI (Internet Small Computer System Interface) or iFCP (Internet Fibre Channel Protocol) storage. This document provides a mechanism to monitor multiple iSNS Servers, including information about registered objects in an iSNS Server. [STANDARDS-TRACK]

This document defines a portion of the Management Information Base (MIB) for use with network management protocols in TCP/IP based Internets. In particular, it defines objects for managing interfaces that conform to the Ethernet Passive Optical Networks (EPON) standard as defined in the IEEE Std 802.3ah-2004, which are extended capabilities to the Ethernet like interfaces. [STANDARDS-TRACK]

This document defines objects for managing Operations, Administration, and Maintenance (OAM) capabilities on Ethernet-like interfaces conformant to the Ethernet OAM functionality defined in the Ethernet in the First Mile (EFM) clauses of the Ethernet standards. The Ethernet OAM functionality is complementary to the Simple Network Management Protocol (SNMP) in that it is focused on a small set of link-specific functions for directly connected Ethernet interfaces. This document defines objects for controlling those link OAM functions and for providing results and status of the OAM functions to management entities. [STANDARDS-TRACK]

This document describes extended performance statistics for TCP. They are designed to use TCP's ideal vantage point to diagnose performance problems in both the network and the application. If a network-based application is performing poorly, TCP can determine if the bottleneck is in the sender, the receiver, or the network itself. If the bottleneck is in the network, TCP can provide specific information about its nature. [STANDARDS-TRACK]

This memo defines a portion of the Management Information Base (MIB) for use with network management protocols in the Internet community. In particular, it describes a set of managed objects that are used to manage Session Initiation Protocol (SIP) entities, which include User Agents, and Proxy, Redirect and Registrar servers. [STANDARDS-TRACK]

This document defines a portion of the Management Information Base (MIB) for use with network management protocols in the Internet community. In particular, it defines objects for managing IEEE 802.3 Medium Attachment Units (MAUs). This document obsoletes RFC 3636. It amends that specification by moving MAU type OBJECT-IDENTITY definitions and relevant textual conventions into a separate Internet Assigned Number Authority (IANA) maintained MIB module. In addition, management information is added to enable support for Ethernet in the First Mile (EFM) and 10GBASE-CX4 MAUs. [STANDARDS-TRACK]

This document updates RFC 4181, "Guidelines for Authors and Reviewers of MIB Documents", to recognize the creation of the IETF Trust. This document specifies an Internet Best Current Practices for the Internet Community, and requests discussion and suggestions for improvements.

This memo defines a portion of the Management Information Base (MIB) for use with network management protocols in the Internet community. In particular, it describes objects used for managing DS1, J1, E1, DS2, and E2 interfaces. This document is a companion to the documents that define managed objects for the DS0, DS3/E3, and Synchronous Optical Network/Synchronous Digital Hierarchy (SONET/SDH) Interface Types.

This document obsoletes RFC 3895. [STANDARDS-TRACK]

This document defines a Structure of Management Information Version 2 (SMIv2) Management Information Base (MIB) module for configuring the security policy database of a device implementing the IPsec protocol. The policy-based packet filtering and the corresponding execution of actions described in this document are of a more general nature than for IPsec configuration alone, such as for configuration of a firewall. This MIB module is designed to be extensible with other enterprise or standards-based defined packet filters and actions. [STANDARDS-TRACK]

This document defines a Management Information Base (MIB) module that contains textual conventions (TCs) to represent commonly used Generalized Multiprotocol Label Switching (GMPLS) management information. The intent is that these textual conventions will be imported and used in GMPLS-related MIB modules that would otherwise define their own representations. [STANDARDS-TRACK]

This memo defines a portion of the Management Information Base (MIB) for use with network management protocols in the Internet community. In particular, it describes managed objects for Generalized Multiprotocol Label Switching (GMPLS)-based traffic engineering. [STANDARDS-TRACK]

This memo defines a portion of the Management Information Base (MIB) for use with network management protocols in the Internet community. In particular, it describes managed objects to configure and/or monitor a Generalized Multiprotocol Label Switching (GMPLS) Label Switching Router (LSR). [STANDARDS-TRACK]

This memo defines a portion of the Management Information Base (MIB) for use with network management protocols in the Internet community. In particular, it defines a basic set of managed objects for Simple Network Management Protocol (SNMP)-based management of Data Over Cable Service Interface Specification (DOCSIS)-compliant Cable Modems and Cable Modem Termination Systems.

This memo obsoletes RFC 2669. [STANDARDS-TRACK]

This memo defines a portion of the Management Information Base (MIB) for use with network management protocols in the Internet community. In particular, it defines a basic set of managed objects for Simple Network Management Protocol (SNMP)-based management of PacketCable- and IPCablecom-compliant Multimedia Terminal Adapter devices. [STANDARDS-TRACK]

This memo defines a portion of the Management Information Base (MIB) for use with network management protocols in TCP/IP-based internets. In particular, it defines objects for managing version 2 of the Open Shortest Path First Routing Protocol. Version 2 of the OSPF protocol is specific to the IPv4 address family. Version 3 of the OSPF protocol is specific to the IPv6 address family.

This memo obsoletes RFC 1850; however, it is designed to be backwards compatible. The functional differences between this memo and RFC 1850 are explained in Appendix B. [STANDARDS-TRACK]

This document defines a Management Information Base (MIB) module for use with network management protocols in the Internet community. In particular, it describes objects used for managing parameters of the "Asymmetric Digital Subscriber Line" family of interface types: ADSL, ADSL2, ADSL2+, and their variants. [STANDARDS-TRACK]

This memo defines a portion of the Management Information Base (MIB) for use with network management protocols in the Internet community. In particular, it describes managed objects for information related to the Fibre Channel network's Virtual Fabrics function. [STANDARDS-TRACK]

This memo defines an experimental portion of the Management Information Base (MIB) for use with network management protocols in the Internet community. In particular, it describes managed objects used for managing Multicast Source Discovery Protocol (MSDP) (RFC 3618) speakers. This memo defines an Experimental Protocol for the Internet community.

There is a need to monitor end-devices such as IP phones, pagers, Instant Messaging clients, mobile phones, and various other handheld computing devices. This memo extends the remote network monitoring (RMON) family of specifications to allow real-time quality-of-service (QoS) monitoring of various applications that run on these devices and allows this information to be integrated with the RMON family using the Simple Network Management Protocol (SNMP). This memo defines the framework, architecture, relevant metrics, and transport requirements for real-time QoS monitoring of applications. [STANDARDS-TRACK]

This memo defines a portion of the Management Information Base (MIB) for use with network management protocols in the Internet community. The document proposes an extension to the Remote Monitoring MIB, RFC 2819. In particular, it describes managed objects used for real-time application Quality of Service (QoS) monitoring. [STANDARDS-TRACK]

This memo specifies two transport mappings of the \%Real-Time Application Quality-of-Service Monitoring (RAQMON) information model defined in RFC 4710 using TCP as a native transport and the Simple Network Management Protocol (SNMP) to carry the RAQMON information from a RAQMON Data Source (RDS) to a RAQMON Report Collector (RRC). [STANDARDS-TRACK]

This document provides minor corrections to and obsoletes RFC 4327.

This memo defines a portion of the Management Information Base (MIB) for use with network management protocols in the Internet community. In particular, it describes managed objects for modeling the Link Management Protocol (LMP). [STANDARDS-TRACK]

This memo defines a portion of the Management Information Base (MIB) for use with network management protocols in the Internet community. In particular, it describes the Remote Authentication Dial-In User Service (RADIUS) (RFC2865) Dynamic Authorization Client (DAC) functions that support the dynamic authorization extensions as defined in RFC 3576. This memo provides information for the Internet community.

This memo defines a portion of the Management Information Base (MIB) for use with network management protocols in the Internet community. In particular, it describes the Remote Authentication Dial-In User Service (RADIUS) (RFC 2865) Dynamic Authorization Server (DAS) functions that support the dynamic authorization extensions as defined in RFC 3576. This memo provides information for the Internet community.

This memo defines a portion of the Management Information Base (MIB) for use with network management protocols in the Internet community. In particular, it describes managed objects for information related to routing within a Fibre Channel fabric, which is independent of the usage of a particular routing protocol. [STANDARDS-TRACK]

This memo defines a portion of the Management Information Base (MIB) for use with network management protocols in the Internet community. In particular, it describes managed objects for information related to the Fibre Channel network's Fabric Shortest Path First (FSPF) routing protocol. [STANDARDS-TRACK]

This document describes the plan to transition responsibility for bridging-related MIB modules from the IETF Bridge MIB Working Group to the IEEE 802.1 Working Group, which develops the bridging technology the MIB modules are designed to manage. This memo provides information for the Internet community.

This memo defines a set of extensions that instrument RADIUS authentication client functions. These extensions represent a portion of the Management Information Base (MIB) for use with network management protocols in the Internet community. Using these extensions, IP-based management stations can manage RADIUS authentication clients.

This memo obsoletes RFC 2618 by deprecating the MIB table containing IPv4-only address formats and defining a new table to add support for version-neutral IP address formats. The remaining MIB objects from RFC 2618 are carried forward into this document. The memo also adds UNITS and REFERENCE clauses to selected objects. [STANDARDS-TRACK]

This memo defines a set of extensions that instrument RADIUS authentication server functions. These extensions represent a portion of the Management Information Base (MIB) for use with network management protocols in the Internet community. Using these extensions, IP-based management stations can manage RADIUS authentication servers.

This memo obsoletes RFC 2619 by deprecating the MIB table containing IPv4-only address formats and defining a new table to add support for version-neutral IP address formats. The remaining MIB objects from RFC 2619 are carried forward into this document. This memo also adds UNITS and REFERENCE clauses to selected objects. [STANDARDS-TRACK]

This memo defines a set of extensions that instrument RADIUS accounting client functions. These extensions represent a portion of the Management Information Base (MIB) for use with network management protocols in the Internet community. Using these extensions, IP-based management stations can manage RADIUS accounting clients.

This memo obsoletes RFC 2620 by deprecating the MIB table containing IPv4-only address formats and defining a new table to add support for version-neutral IP address formats. The remaining MIB objects from RFC 2620 are carried forward into this document. This memo also adds UNITS and REFERENCE clauses to selected objects. This memo provides information for the Internet community.

This memo defines a set of extensions that instrument RADIUS accounting server functions. These extensions represent a portion of the Management Information Base (MIB) for use with network management protocols in the Internet community. Using these extensions, IP-based management stations can manage RADIUS accounting servers.

This memo obsoletes RFC 2621 by deprecating the MIB table containing IPv4-only address formats and defining a new table to add support for version-neutral IP address formats. The remaining MIB objects from RFC 2621 are carried forward into this document. This memo also adds UNITS and REFERENCE clauses to selected objects. This memo provides information for the Internet community.

This memo defines a portion of the Management Information Base (MIB) for use with network management protocols in the Internet community. In particular, it defines a basic set of managed objects for Simple Network Management Protocol (SNMP) based event notification management of Data Over Cable Service Interface Specification (DOCSIS) compliant Cable Modems and Cable Modem Termination Systems. This MIB is defined as an extension to the DOCSIS Cable Device MIB.

This memo specifies a MIB module in a manner that is compliant to the Structure of Management Information Version 2 (SMIv2). The set of objects is consistent with the SNMP framework and existing SNMP standards. [STANDARDS-TRACK]

This memo defines Management Information Bases (MIBs) for performing ping, traceroute, and lookup operations at a host. When managing a network, it is useful to be able to initiate and retrieve the results of ping or traceroute operations when they are performed at a remote host. A lookup capability is defined in order to enable resolution of either an IP address to an DNS name or a DNS name to an IP address at a remote host.

Currently, there are several enterprise-specific MIBs for performing remote ping or traceroute operations. The purpose of this memo is to define a standards-based solution to enable interoperability. [STANDARDS-TRACK]

This memo defines a portion of the Management Information Base (MIB) for use with network management protocols in the Internet community. In particular, it defines a set of managed objects for Simple Network Management Protocol (SNMP) based management of the Radio Frequency (RF) interfaces for systems compliant with the Data Over Cable Service Interface Specifications (DOCSIS). [STANDARDS-TRACK]

This memo defines a portion of the Management Information Base (MIB) for use with network management protocols in TCP/IP-based internets. In particular, it defines objects for managing user identities and the names, addresses, and credentials required manage access control, for use with various protocols. This document was motivated by the need for the configuration of authorized user identities for the iSCSI protocol, but has been extended to be useful for other protocols that have similar requirements. It is important to note that this MIB module provides only the set of identities to be used within access lists; it is the responsibility of other MIB modules making use of this one to tie them to their own access lists or other authorization control methods. [STANDARDS-TRACK]

This memo defines a portion of the Management Information Base (MIB), the Aggregation MIB modules, for use with network management protocols in the Internet community. In particular, the Aggregation MIB modules will be used to configure a network management agent to aggregate the values of a user-specified set of Managed Object instances and to service queries related to the aggregated Managed Object instances. This memo defines an Experimental Protocol for the Internet community.

This document defines a portion of the Management Information Base (MIB) for use with network management protocols in TCP/IP-based internets. In particular, it defines objects for managing remote network monitoring devices.

This document obsoletes RFC 2021, updates RFC 3273, and contains a new version of the RMON2-MIB module. [STANDARDS-TRACK]

This memo defines a portion of the Management Information Base (MIB) for use with network management protocols in the Internet community. Specifically, this document describes a MIB for the Intermediate System to Intermediate System (IS-IS) Routing protocol when it is used to construct routing tables for IP networks. [STANDARDS-TRACK]

This document defines a portion of the Management Information Base (MIB) for use with network management protocols in the Internet community. In particular, it describes managed objects related to the forwarding of Internet Protocol (IP) packets in an IP version-independent manner. This document obsoletes RFC 2096. [STANDARDS-TRACK]

This memo defines a portion of the Management Information Base (MIB) for use with network management protocols in the Internet community. In particular, it describes managed objects used for implementations of the Internet Protocol (IP) in an IP version independent manner. This memo obsoletes RFCs 2011, 2465, and 2466. [STANDARDS-TRACK]

This memo defines a portion of the Management Information Base (MIB), the Mobile-IPv6 MIB, for use with network management protocols in the Internet community. In particular, the Mobile-IPv6 MIB will be used to monitor and control the mobile node, home agent, and correspondent node functions of a Mobile IPv6 (MIPv6) entity. [STANDARDS-TRACK]

This memo defines a portion of the Management Information Base (MIB), for use with network management protocols in the Internet community. In particular, it describes managed objects for Small Computer System Interface (SCSI) entities, independently of the interconnect subsystem layer. [STANDARDS-TRACK]