MPTCP

This document specifies an application proxy, called Transport Converter, to assist the deployment of TCP extensions such as Multipath TCP. A Transport Converter may provide conversion service for one or more TCP extensions. The conversion service is provided by means of the 0-RTT TCP Convert Protocol (Convert).

This protocol provides 0-RTT (Zero Round-Trip Time) conversion service since no extra delay is induced by the protocol compared to connections that are not proxied. Also, the Convert Protocol does not require any encapsulation (no tunnels whatsoever).

This specification assumes an explicit model, where the Transport Converter is explicitly configured on hosts. As a sample applicability use case, this document specifies how the Convert Protocol applies for Multipath TCP.

TCP/IP communication is currently restricted to a single path per connection, yet multiple paths often exist between peers. The simultaneous use of these multiple paths for a TCP/IP session would improve resource usage within the network and thus improve user experience through higher throughput and improved resilience to network failure.

Multipath TCP provides the ability to simultaneously use multiple paths between peers. This document presents a set of extensions to traditional TCP to support multipath operation. The protocol offers the same type of service to applications as TCP (i.e., a reliable bytestream), and it provides the components necessary to establish and use multiple TCP flows across potentially disjoint paths.

This document specifies v1 of Multipath TCP, obsoleting v0 as specified in RFC 6824, through clarifications and modifications primarily driven by deployment experience.

In multiconnectivity scenarios, the clients can simultaneously connect to multiple networks based on different access technologies and network architectures like Wi-Fi, LTE, and DSL. Both the quality of experience of the users and the overall network utilization and efficiency may be improved through the smart selection and combination of access and core network paths that can dynamically adapt to changing network conditions.

This document presents a unified problem statement and introduces a solution for managing multiconnectivity. The solution has been developed by the authors based on their experiences in multiple standards bodies, including the IETF and the 3GPP. However, this document is not an Internet Standards Track specification, and it does not represent the consensus opinion of the IETF.

This document describes requirements, solution principles, and the architecture of the Multi-Access Management Services (MAMS) framework. The MAMS framework aims to provide best performance while being easy to implement in a wide variety of multiconnectivity deployments. It specifies the protocol for (1) flexibly selecting the best combination of access and core network paths for the uplink and downlink, and (2) determining the user-plane treatment (e.g., tunneling, encryption) and traffic distribution over the selected links, to ensure network efficiency and the best possible application performance.

This document describes, surveys, and classifies the protocol mechanisms provided by existing IETF protocols, as background for determining a common set of transport services. It examines the Transmission Control Protocol (TCP), Multipath TCP, the Stream Control Transmission Protocol (SCTP), the User Datagram Protocol (UDP), UDP-Lite, the Datagram Congestion Control Protocol (DCCP), the Internet Control Message Protocol (ICMP), the Real-Time Transport Protocol (RTP), File Delivery over Unidirectional Transport / Asynchronous Layered Coding (FLUTE/ALC) for Reliable Multicast, NACK- Oriented Reliable Multicast (NORM), Transport Layer Security (TLS), Datagram TLS (DTLS), and the Hypertext Transport Protocol (HTTP), when HTTP is used as a pseudotransport. This survey provides background for the definition of transport services within the TAPS working group.

This document discusses both use cases and operational experience with Multipath TCP (MPTCP) in real networks. It lists several prominent use cases where Multipath TCP has been considered and is being used. It also gives insight to some heuristics and decisions that have helped to realize these use cases and suggests possible improvements.

This document analyzes the residual threats for Multipath TCP (MPTCP) and explores possible solutions to address them.

Multipath TCP (MPTCP) adds the capability of using multiple paths to a regular TCP session. Even though it is designed to be totally backward compatible to applications, the data transport differs compared to regular TCP, and there are several additional degrees of freedom that applications may wish to exploit. This document summarizes the impact that MPTCP may have on applications, such as changes in performance. Furthermore, it discusses compatibility issues of MPTCP in combination with non-MPTCP-aware applications. Finally, the document describes a basic application interface that is a simple extension of TCP's interface for MPTCP-aware applications.

Often endpoints are connected by multiple paths, but communications are usually restricted to a single path per connection. Resource usage within the network would be more efficient were it possible for these multiple paths to be used concurrently. Multipath TCP is a proposal to achieve multipath transport in TCP.

New congestion control algorithms are needed for multipath transport protocols such as Multipath TCP, as single path algorithms have a series of issues in the multipath context. One of the prominent problems is that running existing algorithms such as standard TCP independently on each path would give the multipath flow more than its fair share at a bottleneck link traversed by more than one of its subflows. Further, it is desirable that a source with multiple paths available will transfer more traffic using the least congested of the paths, achieving a property called "resource pooling" where a bundle of links effectively behaves like one shared link with bigger capacity. This would increase the overall efficiency of the network and also its robustness to failure.

This document presents a congestion control algorithm that couples the congestion control algorithms running on different subflows by linking their increase functions, and dynamically controls the overall aggressiveness of the multipath flow. The result is a practical algorithm that is fair to TCP at bottlenecks while moving traffic away from congested links. This document defines an Experimental Protocol for the Internet community.

Hosts are often connected by multiple paths, but TCP restricts communications to a single path per transport connection. Resource usage within the network would be more efficient were these multiple paths able to be used concurrently. This should enhance user experience through improved resilience to network failure and higher throughput.

This document outlines architectural guidelines for the development of a Multipath Transport Protocol, with references to how these architectural components come together in the development of a Multipath TCP (MPTCP). This document lists certain high-level design decisions that provide foundations for the design of the MPTCP protocol, based upon these architectural requirements. This document is not an Internet Standards Track specification; it is published for informational purposes.

Multipath TCP (MPTCP for short) describes the extensions proposed for TCP so that endpoints of a given TCP connection can use multiple paths to exchange data. Such extensions enable the exchange of segments using different source-destination address pairs, resulting in the capability of using multiple paths in a significant number of scenarios. Some level of multihoming and mobility support can be achieved through these extensions. However, the support for multiple IP addresses per endpoint may have implications on the security of the resulting MPTCP. This note includes a threat analysis for MPTCP. This document is not an Internet Standards Track specification; it is published for informational purposes.